Sản phẩm / Dịch vụ
PRODUCT
Automatic Cutting Machine GP-50 / 70 Series
GP-50 / GP-70
Highly equipped Cutting machine which can deal with general material , heavy-duty material as well as trim covers. Speedy operative function through touch panel and sound navigation system. Combined with NK2000 spreading machine and linked through LAN, common CAD data can be shared to make it possible to connect spreading process to cutting process automatically
Ứng dụng chính
Standard equipment
Material Shift Navigated System
Automatic Knife worn-away measurement and self-adjustment function
Vacuum pressure self-control system
Self-adjustment Speed function
3-Punch device (70T/50T standard-equipped )
3×8mm knife spec. ( Mountable on 70H )
Vertical double cam follower spec. ( Mountable on 70H/50H )
Opposite-sided operation
Part-specified Cutting
Troubleshooting
Power recovery
Cutting parameter setting
Scaled cutting
Pattern-matching cutting
Waste cutting
Suitable material
Whole apparel-use material
Tính năng sản phẩm
MS- navigate system to realize high productivity
MS-navigate system that delivers the material while cutting can reduce operative time. (MS＝Material Shift）
Automatic Knife worn-away measurement and self-adjustment function
Automatic Knife worn-away measurement and self-adjustment by Knife self-grinding function.
Brush cleaner to keep the brush bed free of cutting scraps
Cutting scraps that is attached to the brushes shall be cleaned out while cutting process is ongoing so as to keep the vacuum functioning well and alleviate the damage to the brushes simultaneously.
Equipped with necessary specification for cutting heavy-duty material
Automatic vacuum pressure control
Vacuum pressure is controlled automatically by the sensor at a specific level.
Automatic speed adjustment
Knife speed is automatically adjusted where parts (pattern) are adjacent to each other without much space in between.
Knife Navigate system
The loading of knife during cutting process is detected and adjusted automatically so as to perform the cutting process without errors
3-Punch device ( Standard for 70H / 50H )
Up to 4 Punches can be mounted
３ｘ８ｍｍ knife spec. ( mountable on 70H )
Knife is capable of withstanding loading of cutting heavy-duty material smoothly.
Vertical double cam followers spec. ( Standard for 70H / 50H )
Double cam followers keep the knife firm and prevent wobbling while cutting.
Đặc điểm cơ thể
Standard specification
General Material
Type 3-L (1800)
Type 6-L (1800)
Type 3-S (1100)
Type 6-S (1100)
GP50G
MS Navigate
Automatic knife adjustment
Automatic vacuum adjustment
L = 2000 mm
S = 1200 mm
L = 3P 200V 18.5Kw
S = 3P 200V 15Kw
Head speed : 37meter/min
Automatic cutting speed adjustment function : O
Layer height for cutting : 50 mm
Knife thickness : 2.0 x 8 standard
Cutting length Type L : L=1.8 m
Cutting length Type S : S=1.1 m
Effective cutting width : Type3 1.8m ; Type6 2.2m
Machine height : 800 mm ± 20 mm
0.6Mpa (60kgf / ㎠) 80L / min
Tìm kiếm sản phẩm
